INFORMATION TECHNOLOGY SUPPORT SERVICES

Whether you need managed IT, cloud, data center, professional IT services, or a combination of these, we'll put nearly 30 years of expertise to work for your business success.


If you’re looking for...


- World-Class Managed IT Services


- Proven IT Business Strategies


- Support from a Leading Tech Partner

Networking Solutions

Mikrotik Networking

Networking solutions made easy

Total Solutions IT are your local MikroTik certified distributor. With over 10 years experience with deployment and maintenance of both basic and advanced networking solutions, we can ensure the right solution is available to your business. Servicing Mikrotik clients in both Albury, Wodonga and surrounds. Mikrotik is the perfect on-premises networking solution to help complement your Cloud Based services and ensure reliable and robust networking to the cloud.

Mikrotik Software

Router OS

RouterOS is the operating system of RouterBOARD

The backbone of the Mikrotik network product range is the Router OS software.

Some of the many features of this software includes advanced routing, traffic firewall, bandwidth management and Quality Of Service , General and Guest Wireless Access Point, WIFI Backhaul Link, Hotspot Gateway, VPN Server and more.

Wireless Features
  • 802.11a/b/g/n/ac support
  • Nv2 TDMA protocol
  • WDS and Virtual AP
  • HotSpot for Plug-and-Play access
  • HotSpot for Plug-and-Play access
Firewall Features
  • Advanced Quality of Service
  • Stateful firewall, tunnels
  • STP bridging with filtering
VPN Features
  • Open VPN - Used for Site to Site VPN and Client Access
  • PPTP VPN - Site to Site VPN
  • IPSEC VPN - Azure Cloud VPN Access
  • L2TP VPN - Client Device Remote Access
General Features
  • Remote WinBox GUI and Web admin
  • High availability with VRRP
  • Bonding of Interfaces
  • Telnet/mac-telnet/ssh/console admin
  • Real-time configuration and monitoring
  • 3G/LTE support
  • OpenFlow support
Routing Features
  • RIP Routing
  • OSPF Routing
  • BGP Routing
  • MPLS routing

Mikrotik Hardware

RouterBoard

Mikrotik Networking

Carrier Grade Hardware for Small and Medium Business.

Mikrotik has created an extensive range of networking hardware that will suit every business requirement. As this is a specialised product it will be best to have a conversation in order to ensure your requirements are fitted with the correct solutions.

Please have a look at the range of hardware below for some of the more commonly used Mikrotik networking equipment and feel free to contact us if you have further questions regarding any of the items below.

The routerboard hardware is range is extensive, below is the range of commonly used devices we deploy with IT Solutions. if you would like to see the full range select the button below

RB2011UiAS-2HnD-IN

2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM

Suitable for Small and medium business, will provide networking of up to 10 devices & wifi. Can be combined with a 4G Unit for 4G Failover.

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

Mikrotik RB2011

RB4011iGS+5HacQ2HnD-IN

Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4×4 MIMO 802.11a/b/g/n/ac wireless and desktop case

RB4011 series – amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!

The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.

RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.

wAP

Small weatherproof wireless access point for mounting on a ceiling, wall or pole

The wAP is a small weatherproof wireless access point for your mobile devices – perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours – black (RBwAP2nD-BE) and white (RBwAP2nD).

The wAP is weatherproof and can be fixed to any external wall from the inside of the case – so that it is securely attached to it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.

Mikrotik Albury

wAP ac LTE kit

Small weatherproof Dual Band 2.4 / 5 GHz wireless access point with LTE antennas and modem for International LTE bands 1,2,3,7,8,20,38 and 40.

A small package with a huge ambition – the wAP ac LTE is an extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on our popular weatherproof wAP form factor. It has two Gigabit Ethernet ports – you can use the device as a wired router with LTE backup via the Micro SIM slot. Alternatively, you can also enjoy wireless experience anywhere – indoors or outdoors. wAP ac LTE is designed to deliver strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30 C‎° to +60 C‎ and can be easily mounted on walls, ceilings or poles.

CRS326-24G-2S+RM

24 Gigabit port switch with 2 x SFP+ cages in 1U rackmount case, Dual boot (RouterOS or SwitchOS)

SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features!

It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings.

It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

CRS328-24P-4S+RM

24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case, Dual Boot and PoE output, 500W

RS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).

CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3×150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.

The device has a “Dual boot” feature that allows you to choose between two operating systems – RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market.